Calendar

Nov
17
Sat
Gun Range – Target System Install HELP NEEDED!! @ Lone Pine Hunters Club Indoor Gun Range
Nov 17 @ 8:00 am – 8:00 pm
Gun Range - Target System Install HELP NEEDED!! @ Lone Pine Hunters Club Indoor Gun Range | Hollis | New Hampshire | United States

We need your help to complete the interior of the new Lone Pine Hunter’s Club gun range. We know we are asking for help during the week but it is important to get as much help as we can.

There has been a change in plans for the scheduled install of the Action Target Systems. The equipment was supposed to be delivered and ready for install on Monday Nov 5th but unfortunately the delivery of the equipment has been delayed.
Some of you may have already received an email explaining this change.

Below is a list of tasks that will need to be accomplished during the install of the Target Retrieval system. We will need as many people as we can to get these done.

1. Assemble the back stop. This is a metal structure that will need to be set up first. It is critical that we get this done first so that we can Bill the residents. (Skilled/General Laborer(s))
2. Move Rubber. To do this we will need many hands. The bags of rubber are 2000 lb bags. We will need to shovel and put the rubber into the back stop after it is assembled. I am guessing day two or three. (General Laborer(s))
3. Hang uni-strut. This is a skilled task. It will require that we have hammer drills and someone that can measure on the concrete panels and snap a straight line.(Skilled Laborer(s)/Skilled Tradesman(s))
4. Install the Stall walls (Skilled/General Laborer(s), Skilled Tradesman(s))
5. Hang the track system. This will require bolting the track pieces together , possibly cutting them. (Skilled/General Laborer(s), Skilled Tradesman(s))
6. Hanging the sound panels on the walls. I am not sure on the method of hanging. Possibly glue, possibly screws.(Skilled/General Laborer(s), Skilled Tradesman(s))
7. Hang the lights. These need to be hung so that the electrician can tie them in. The sooner the better so that we can see.(Skilled Laborer(s), Skilled Tradesman(s))
8. Hang the ballistic deflector panels .(Skilled/General Laborer(s), Skilled Tradesman(s))
9. Install the deflectors by the doorways.(Skilled/General Laborer(s), Skilled Tradesman(s))
10. Hang the control systems. (Skilled/General Laborer(s), Skilled Tradesman(s))

[sign_up_sheet]

Nov
18
Sun
Gun Range – Target System Install HELP NEEDED!! @ Lone Pine Hunters Club Indoor Gun Range
Nov 18 @ 8:00 am – 8:00 pm
Gun Range - Target System Install HELP NEEDED!! @ Lone Pine Hunters Club Indoor Gun Range | Hollis | New Hampshire | United States

We need your help to complete the interior of the new Lone Pine Hunter’s Club gun range. We know we are asking for help during the week but it is important to get as much help as we can.

There has been a change in plans for the scheduled install of the Action Target Systems. The equipment was supposed to be delivered and ready for install on Monday Nov 5th but unfortunately the delivery of the equipment has been delayed.
Some of you may have already received an email explaining this change.

Below is a list of tasks that will need to be accomplished during the install of the Target Retrieval system. We will need as many people as we can to get these done.

1. Assemble the back stop. This is a metal structure that will need to be set up first. It is critical that we get this done first so that we can Bill the residents. (Skilled/General Laborer(s))
2. Move Rubber. To do this we will need many hands. The bags of rubber are 2000 lb bags. We will need to shovel and put the rubber into the back stop after it is assembled. I am guessing day two or three. (General Laborer(s))
3. Hang uni-strut. This is a skilled task. It will require that we have hammer drills and someone that can measure on the concrete panels and snap a straight line.(Skilled Laborer(s)/Skilled Tradesman(s))
4. Install the Stall walls (Skilled/General Laborer(s), Skilled Tradesman(s))
5. Hang the track system. This will require bolting the track pieces together , possibly cutting them. (Skilled/General Laborer(s), Skilled Tradesman(s))
6. Hanging the sound panels on the walls. I am not sure on the method of hanging. Possibly glue, possibly screws.(Skilled/General Laborer(s), Skilled Tradesman(s))
7. Hang the lights. These need to be hung so that the electrician can tie them in. The sooner the better so that we can see.(Skilled Laborer(s), Skilled Tradesman(s))
8. Hang the ballistic deflector panels .(Skilled/General Laborer(s), Skilled Tradesman(s))
9. Install the deflectors by the doorways.(Skilled/General Laborer(s), Skilled Tradesman(s))
10. Hang the control systems. (Skilled/General Laborer(s), Skilled Tradesman(s))

[sign_up_sheet]

Nov
19
Mon
Gun Range – Target System Install HELP NEEDED!! @ Lone Pine Hunters Club Indoor Gun Range
Nov 19 @ 8:00 am – 8:00 pm
Gun Range - Target System Install HELP NEEDED!! @ Lone Pine Hunters Club Indoor Gun Range | Hollis | New Hampshire | United States

We need your help to complete the interior of the new Lone Pine Hunter’s Club gun range. We know we are asking for help during the week but it is important to get as much help as we can.

There has been a change in plans for the scheduled install of the Action Target Systems. The equipment was supposed to be delivered and ready for install on Monday Nov 5th but unfortunately the delivery of the equipment has been delayed.
Some of you may have already received an email explaining this change.

Below is a list of tasks that will need to be accomplished during the install of the Target Retrieval system. We will need as many people as we can to get these done.

1. Assemble the back stop. This is a metal structure that will need to be set up first. It is critical that we get this done first so that we can Bill the residents. (Skilled/General Laborer(s))
2. Move Rubber. To do this we will need many hands. The bags of rubber are 2000 lb bags. We will need to shovel and put the rubber into the back stop after it is assembled. I am guessing day two or three. (General Laborer(s))
3. Hang uni-strut. This is a skilled task. It will require that we have hammer drills and someone that can measure on the concrete panels and snap a straight line.(Skilled Laborer(s)/Skilled Tradesman(s))
4. Install the Stall walls (Skilled/General Laborer(s), Skilled Tradesman(s))
5. Hang the track system. This will require bolting the track pieces together , possibly cutting them. (Skilled/General Laborer(s), Skilled Tradesman(s))
6. Hanging the sound panels on the walls. I am not sure on the method of hanging. Possibly glue, possibly screws.(Skilled/General Laborer(s), Skilled Tradesman(s))
7. Hang the lights. These need to be hung so that the electrician can tie them in. The sooner the better so that we can see.(Skilled Laborer(s), Skilled Tradesman(s))
8. Hang the ballistic deflector panels .(Skilled/General Laborer(s), Skilled Tradesman(s))
9. Install the deflectors by the doorways.(Skilled/General Laborer(s), Skilled Tradesman(s))
10. Hang the control systems. (Skilled/General Laborer(s), Skilled Tradesman(s))

[sign_up_sheet]

Nov
20
Tue
Gun Range – Target System Install HELP NEEDED!! @ Lone Pine Hunters Club Indoor Gun Range
Nov 20 @ 8:00 am – 8:00 pm
Gun Range - Target System Install HELP NEEDED!! @ Lone Pine Hunters Club Indoor Gun Range | Hollis | New Hampshire | United States

We need your help to complete the interior of the new Lone Pine Hunter’s Club gun range. We know we are asking for help during the week but it is important to get as much help as we can.

There has been a change in plans for the scheduled install of the Action Target Systems. The equipment was supposed to be delivered and ready for install on Monday Nov 5th but unfortunately the delivery of the equipment has been delayed.
Some of you may have already received an email explaining this change.

Below is a list of tasks that will need to be accomplished during the install of the Target Retrieval system. We will need as many people as we can to get these done.

1. Assemble the back stop. This is a metal structure that will need to be set up first. It is critical that we get this done first so that we can Bill the residents. (Skilled/General Laborer(s))
2. Move Rubber. To do this we will need many hands. The bags of rubber are 2000 lb bags. We will need to shovel and put the rubber into the back stop after it is assembled. I am guessing day two or three. (General Laborer(s))
3. Hang uni-strut. This is a skilled task. It will require that we have hammer drills and someone that can measure on the concrete panels and snap a straight line.(Skilled Laborer(s)/Skilled Tradesman(s))
4. Install the Stall walls (Skilled/General Laborer(s), Skilled Tradesman(s))
5. Hang the track system. This will require bolting the track pieces together , possibly cutting them. (Skilled/General Laborer(s), Skilled Tradesman(s))
6. Hanging the sound panels on the walls. I am not sure on the method of hanging. Possibly glue, possibly screws.(Skilled/General Laborer(s), Skilled Tradesman(s))
7. Hang the lights. These need to be hung so that the electrician can tie them in. The sooner the better so that we can see.(Skilled Laborer(s), Skilled Tradesman(s))
8. Hang the ballistic deflector panels .(Skilled/General Laborer(s), Skilled Tradesman(s))
9. Install the deflectors by the doorways.(Skilled/General Laborer(s), Skilled Tradesman(s))
10. Hang the control systems. (Skilled/General Laborer(s), Skilled Tradesman(s))

[sign_up_sheet]

Nov
21
Wed
Gun Range – Target System Install HELP NEEDED!! @ Lone Pine Hunters Club Indoor Gun Range
Nov 21 @ 8:00 am – 8:00 pm
Gun Range - Target System Install HELP NEEDED!! @ Lone Pine Hunters Club Indoor Gun Range | Hollis | New Hampshire | United States

We need your help to complete the interior of the new Lone Pine Hunter’s Club gun range. We know we are asking for help during the week but it is important to get as much help as we can.

There has been a change in plans for the scheduled install of the Action Target Systems. The equipment was supposed to be delivered and ready for install on Monday Nov 5th but unfortunately the delivery of the equipment has been delayed.
Some of you may have already received an email explaining this change.

Below is a list of tasks that will need to be accomplished during the install of the Target Retrieval system. We will need as many people as we can to get these done.

1. Assemble the back stop. This is a metal structure that will need to be set up first. It is critical that we get this done first so that we can Bill the residents. (Skilled/General Laborer(s))
2. Move Rubber. To do this we will need many hands. The bags of rubber are 2000 lb bags. We will need to shovel and put the rubber into the back stop after it is assembled. I am guessing day two or three. (General Laborer(s))
3. Hang uni-strut. This is a skilled task. It will require that we have hammer drills and someone that can measure on the concrete panels and snap a straight line.(Skilled Laborer(s)/Skilled Tradesman(s))
4. Install the Stall walls (Skilled/General Laborer(s), Skilled Tradesman(s))
5. Hang the track system. This will require bolting the track pieces together , possibly cutting them. (Skilled/General Laborer(s), Skilled Tradesman(s))
6. Hanging the sound panels on the walls. I am not sure on the method of hanging. Possibly glue, possibly screws.(Skilled/General Laborer(s), Skilled Tradesman(s))
7. Hang the lights. These need to be hung so that the electrician can tie them in. The sooner the better so that we can see.(Skilled Laborer(s), Skilled Tradesman(s))
8. Hang the ballistic deflector panels .(Skilled/General Laborer(s), Skilled Tradesman(s))
9. Install the deflectors by the doorways.(Skilled/General Laborer(s), Skilled Tradesman(s))
10. Hang the control systems. (Skilled/General Laborer(s), Skilled Tradesman(s))

[sign_up_sheet]

Dec
12
Wed
Monthly Club Meeting – 7pm @ Lone Pine Hunter's Clubhouse
Dec 12 @ 7:00 pm
Monthly Club Meeting - 7pm @ Lone Pine Hunter's Clubhouse | Hollis | New Hampshire | United States

When and Where we Meet:

Lone Pine Hunters Club, Inc., unless members are otherwise notified, meets monthly on the second Wednesday of each month at the Lone Pine Hunter’s Club Clubhouse.‎ Meetings start at 7:00 p.m.

Prior to the 7pm meeting, the members have the opportunity to talk about their finds, socialize, partake in refreshments, and participate in the regular monthly gun or bow drawings.  Dinner is usually available to purchase starting at 6pm for $8.00

The meeting starts at 7pm sharp, the meeting includes minutes of the previous meeting, treasurer’s report, old business, new business, and introduction of new members and guests.  The club also has regular monthly drawings and “Membership Attendance Drawing” held at the end of the member meeting.

A program is usually offered each month and could include a speaker, a demonstration, or another presentation of interest to the members.

Monthly Drawings:

At each meeting there is an opportunity to participate in several drawings. Money generated by these drawings is used to support the club, improve the number and quality of member activities, and to benefit the community. The “Membership Attendance Drawing” is only open to members in good standing who are present at the time of the drawing. All other drawings are open to both members and guests.

Guests:

Guests are welcome and encouraged to attend, in the future, as a member. If a guest decides to become a member, they must attend at least one general club meeting, and have 2 club readings before being voted into the club.  To participate in club activities, the guest must then pay the membership fees required.